Thank you for your interest in Parker Hannifin Corporation part number F451STJCJ5080808-78.0, a Hose Assembly Nonmetallic product we carry that is featured with the NSN 4720-01-642-5945. This component is ready for purchase at any time, so you are encouraged to complete the Request for Quote (RFQ) form provided below if you would like to obtain pricing information for your consideration. All we ask is that you supply us with essential details like desired item quantities, target price, and when fulfillment is expected, as this will ensure our response caters to any distinct specifications.
Note : We Will Not Share Your Information To Any Third Parties.
At ASAP Semiconductor, our goal is to make the process of finding and securing precise components simple, which is why we present vital listing details with each offering here on Boundless Aerospace. For instance, part number F451STJCJ5080808-78.0 was manufactured by Parker Hannifin Corporation under the CAGECode 61424, and with the NSN 4720-01-642-5945, it belongs to FSC 4720 Hose and Tubing Flexible. More than that, all our inventory is delivered with any pertinent qualifying certifications or manufacturer trace documentation for your further benefit. Bearing all of this in mind, be sure to request a quote for part number F451STJCJ5080808-78.0 today, and we will be in touch as soon as possible.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-642-5945 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 016425945 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| F451STJCJ5080808-78.0 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.80 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.5 INCHES" |
| AHNC | CONNECTION STYLE | SWIVEL, PLAIN ALL ENDS" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC ALL ENDS" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL HOSE ALL ENDS" |
| CMLP | THREAD QUANTITY PER INCH | 16 ALL ENDS" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.8125 INCHES ALL ENDS" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT" |
| CRXX | MEASURING METHOD AND LENGTH | 78.0 INCHES NOMINAL EXCLUDING END FITTINGS" |
| CWDW | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.500 INCHES ALL ENDS" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TYPE II FE/ZN8, CR6 FREE ZINC ASSN STD SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UN ALL ENDS" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.80 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.5 INCHES" |
| AHNC | CONNECTION STYLE | SWIVEL, PLAIN ALL ENDS" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC ALL ENDS" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL HOSE ALL ENDS" |
| CMLP | THREAD QUANTITY PER INCH | 16 ALL ENDS" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.8125 INCHES ALL ENDS" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT" |
| CRXX | MEASURING METHOD AND LENGTH | 78.0 INCHES NOMINAL EXCLUDING END FITTINGS" |
| CWDW | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.500 INCHES ALL ENDS" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TYPE II FE/ZN8, CR6 FREE ZINC ASSN STD SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UN ALL ENDS" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
